1. W2 Steel Flat Barstock | 12×1.5×5/16 | Knife Making
- 12″ x 1.5″ x 5/16″, hot rolled
- High-carbon steel plus vanadium
- Perfect for knife-making
- Good for stock removal or forging
- Excellent for hamons
2. RMP Knife Blade Steel – High Carbon Annealed, 1095 Knife Making Billets, 2 Inch x 12 Inch x 0.187 Inch
- Quantity: 1 Blank
- 3/16″ 1095 Carbon Steel
- 2″ x 12″ x .188″
- Made in the USA
3. RMP Knife Blade Steel – 1074/1075 High Carbon Annealed Steel Billets, 1.5 Inch x 12 Inch x 0.187 Inch
- Quantity: 1 Blank
- 3/16″ 1074/1075 High Carbon Steel
- 1.5″ x 12″ x .188″
- Made in the USA
4. Introduction to Knifemaking: The Beginner’s DIY Guide to Making Knives
5. RMP Knife Blade Steel – High Carbon, 1095 Knife Making Billets, 1.5 Inch x 12 Inch x 0.125 Inch
- Quantity: 1 Blank
- 1.5 inch wide 1095 Carbon Steel
- 1.5″ x 12″ x .125″
- Made in the USA
6. OXO Good Grips 3-in-1 Avocado Slicer – Green
- All in one tool splits, pits and slices avocados
- Stainless steel pitter removes pit with one quick twist
- Slicer lifts fruit from skin in seven perfect pieces
- Soft, comfortable non slip grip
- Top rack dishwasher safe
7. Texas Knifemakers Supply – 1095 High Carbon Annealed Forging Steel Barstock for Knife Making – 3/16″ x 1-1/2″ x 12″
- 1095 is a moderately high carbon content forging steel used for making knives. This oil quenching steel is in the annealed state.
- Iron alloy contains 1.0% carbon, 0.90% manganese, 0.05% sulphur, and 0.04% phosphorus.
- Dimensions are 3/16″ x 1-1/2″ x 12″.
- Layer 1095 with 15N20 to forge Damascus, and etch with Ferric Chloride to bring out the contrast.
- Higher carbon steels like 1095 will keep an edge much better than stainless steels, but are also more susceptible to rust without proper care. (We mark our 1095 with blue and orange to distinguish it from other steels we sell)
8. AbbottoKaylan Knife Blade Steel Knife Blanks- High Carbon Annealed, 1095 Knife Making Billets,1.57 Inch x 12 Inch x 0.16 Inch, 3 Pack
- The product is slightly bent, please consider carefully before buying..1095 blade steel specifications: 1.57 inches wide * 12 inches long * 0.16 inches thick,Weight: 0.8 lb * 3
- Create your own custom knife that will last a lifetime. Made from high carbon steel, this AbbottoKaylan knife billet sharpens easily, resists chipping, and holds a great edge.
- 1095 spring steel is a kind of high carbon steel, which has the characteristics of heat resistance, low temperature resistance, oxidation resistance, corrosion resistance, etc.
- The highest quality of high carbon steel is 1095, which has a carbon content of 1.03%. After heat treatment, it can reach the hardness of HRc58-60. The toughness is very good, but it is not rust resistant. Large-scale felling knives and military knives such as the American “KA-BAR” army knives during World War II used 1095 as the blade material.
9. RMP Knife Blade Steel – High Carbon Annealed, 1095 Knife Making Billets, 1.5 Inch x 12 Inch x 0.187 Inch, 3 Pack
- Quantity: 3 Blanks
- 3/16″ 1095 Carbon Steel
- 1.5″ x 12″ x .188″
- Made in the USA
10. RMP Knife Blade Steel – High Carbon Annealed, 1095 Knife Making Billets, 3 Inch x 12 Inch x 0.187 Inch (± 1/16)
- Quantity: 1 Blank
- 3/16″ 1095 Carbon Steel
- 3″ x 12″ x .188″
- Made in the USA
Table of Contents
