1. Cloud Microphones Cloudlifter CL-1 Mic Activator
- Uses Phantom power to give passive mics (mainly used for dynamic and ribbon mics) up to +25dB without passing Phantom power on to mic
- Easy to use self contained design requires only Phantom power to work. **Does not use Phantom power to power mics
- Recommended for use with all passive dynamic microphones
- Compatible with tube, battery, or power supply driven microphones – safe for all passive ribbons with no transfer of Phantom
- Does not power the mics themselves using Phantom power (that is not what this is designed for). instead, place the cloudlifter at the front of your dynamic mic, then hit it with Phantom Power and your basic mic (even an SM58 style mic) will shine like never before
2. TRITON AUDIO FetHead in-Line Microphone Preamp
3. dbx 286s Microphone Preamp & Channel Strip Processor, Mono 4-Way
- Studio quality mic preamp/channel strip processor
- Classic dbx compression puts great sound within easy reach
- Frequency tuneable de-esser reduces sibilance and high frequency distortion
- Enhancer increases the detail and definition of the high and low frequencies
- Program adaptive expander/Gate. Frequency response: 20Hz to 20kHz
- Input: 1/4″ TRS (x2) and XLR (x1); output: 1/4″ TRS (x1)
- Operating voltage: 120VAC 60Hz, 100VAC 50/60Hz
- Purchase includes: dbx286s, power cord, operation manual, and rack mount screws and washers (x4)
4. Golden Age Project Pre-73 MKIII Mic Preamp
- Vintage Style electronics, no intergrated circuits in the signal pathEnough gain to handle passive ribbon mics with quiet sound sourcesGAIN/LINE mode switch, gain is reduced by 30 dB in LINE modeSelectable two position high frequency AIR boost eq, 3 or 6 dB @ 30 kHzSelectable 6 dB/octave two frequency high pass filterTantalum capacitors in the signal pathSwitchable impedance in MIC modeSwitchable phantom power and absolute phaseA high-impedance instrument inputA simple but effective 4-step LED o
- The signal path uses only discrete components like resistors, capacitors and transistors
- The input and output is transformer balanced, using two different transformers, each one optimized for its purpose
- This is the way audio components were built before integrated circuits became available
- The circuit used in the PRE-73 MKIII is similar to the preamp section in the classical 1073 module with a corresponding sound character that is warm, punchy, sweet and musical
5. Rolls MP13 Mini Microphone Preamp with SM Series XLR M to XLR F Microphone Cable – 6′
- A Simple Cost-Effective Solution
- Single-Channel Design
- 3.5mm and XLR Inputs
- 1/4″ and XLR Outputs
- Single Gain Control with Clip Indicator
6. DBX 286S Preamplifier Channel Strip Mic Pre Amp w/ 2x 25′ XLR Cables NEW
- Single Channel
- 4 Processors
- Compressor
- De-Esser
- Enhancer
7. ART TubeMPSTV3 Variable Valve Voicing Tube Mic Preamp With Limiter
- Dimensions: 5.0″D x 5.5″W x 2.0″H
- Weight: 1.5 lbs
- Rugged all-steel construction
- Designed for years of continuous, reliable performance
- 1 year warranty
8. sE Electronics DM1 Dynamite Active Inline Microphone Preamplifier with 10-Pack Touch Fastener Straps & 20′ XLR-XLR Cable Bundle
- For Passive Ribbon or Dynamic Microphone
- Provides 28 dB of Gain
- Class-A Design
- Low Self-Noise
- Requires Phantom Power
9. Soyuz Microphones Launcher – Analog In-Line Microphone Preamp and Activator for Dynamic and Ribbon Mics
- MAGIC LITTLE BOX – The Launcher is not meant to be transparent and clean like other “gain boosters” and audio amplifiers on the market. It was specifically designed to add color and character to your microphones and bring your sounds to life. The Launcher features a custom hand-wound transformer and an analog circuit that provides a warm texture and clarity that will make your mics “open up” and become more three-dimensional in any signal chain.
- DREAM IN COLOR – Whether on the stage, in the booth, or in your bedroom, the Launcher is plug and play and gives your dynamic and ribbon microphones the ability to perform incredibly with virtually any interface or preamp by optimizing the sound of your source, boosting your gain by 26dB, and lowering the amount of audible noise in your signal chain.
- COUNTDOWN TO THE PERFECT SOUND – The Launcher is the culmination of years of beta testing and feedback from musicians and engineers around the world. We did not stop until the winning combination was found. The Launcher’s custom transformer and proprietary circuit have become one of Soyuz’s most closely guarded secrets.
- TAKE YOUR SOUND WITH YOU – If you have a passion for recording music, producing podcasts, or just love creating, the Launcher will take your sound to the next level. You don’t need a huge studio to have a huge sound– the Launcher will get you there no matter the time or place.
- HANDMADE & ORIGINAL DESIGN – Each Launcher is individually handcrafted in our own facility to give that old school, magic sound to your recordings using only a common dynamic or ribbon mic and an ordinary interface.
10. Presonus BlueTube DP v2 2-Channel Mic/Instrument Tube Preamp
- Dual path, with both 12AX7 vacuum tube and solid-state gain stages
- Combo mic/instrument inputs with class A XMAX mic Preamplifiers and 48V phantom power
- Tube drive tube-saturation control
- Illuminated Analog VU input-level meter
- 80 Hz high-pass filter, -20 dB pad, polarity-reverse switch
- Compact 1/2U Rack-Mount chassis
Table of Contents
