1. 1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

  • ONLY support LiPo 3.7V/4.20V 1S battery
  • Support 0.2A/0.6A charge current by switch button ( Suggest using 0.2A if you charge six at the same time and 0.6A if you only do 2)
  • USB interface input suggested range: 5V±5% on 0.5-2.4A, suggested 2.4A or above
  • Charger plug: Micro 1.25 and JST-PH 2.0, AKA mCX and mCPX, Charging max 6 batteries at the same time. ( Need to consider width of battery)
  • The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged.

2. Upgrade 1S LiPo Battery USB 3.8V/4.35V Charger 6 Channel 1S LiHV Charger for EMAX Tinyhawk Blade Inductrix Tiny Whoop Inductrix FPV Plus Battery Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

  • ONLY support LiHV 3.8V/4.35V 1S battery, not for 3.7V/4.20V 1S LiPo battery
  • Support 0.2A/0.6A charge current by switch button ( Suggest using 0.2A if you charge six at the same time and 0.6A if you only do 2)
  • USB interface input suggested range: 5V±5% on 0.5-2.4A, suggested 2.4A or above
  • Charger plug: Micro 1.25 and JST-PH 2.0, AKA mCX and mCPX, Charging max 6 batteries at the same time. ( Need to consider width of battery)
  • The 6 LED lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged.

3. Valken Airsoft Li-po/Life Smart Battery Charger – Compact – 2-3 Cell Quick Balancing

  • Output Current: 100-240V AC
  • Display: 3x Bicolor LED
  • Charging Ports: Separate 2 and 3 cell ports

4. Crazepony 2pcs USB Charger Cable 1A with XH-3P Connector for Hosim Q903 Q905 Axial SCX10 2S 7.4V LiPo Battery RC Car Rock Crawler FPV Drone Quadcopter

  • The LiPo Battery USB Charger Cable has indicator, IC protection circuit
  • Input: DC 5V, Output current: 1000mA
  • Suit for 7.4V Lipo battery XH-3pin plug, it take 4 hours to charge full. (It is not recommended to use this charger with a battery below 500mah)
  • Intelligent protection:overload protection, over-voltage protection,overcharge protection
  • Charging: Green Light Flash, Red Light Solid; Full Charged: Green and Red Light all Solid; Alarm: Red Light Flash Quickly

5. SUPULSE LiPo Battery Charger 2S-3S RC Balance Charger 7.4-11.1V B3AC Pro Compact Charger

  • Parameter: 2S & 3S Lipo Battery Charger, AC110-240V input, max charge current: 3*800mA.
  • Balance Charger: Each cell is charged by independent line, which make sure each power supply is always fully charged, extending battery life.
  • This lipo charger is compact and light, especially there is separated corresponding balance port for each battery pack.
  • LED to indicate: Double colour LED can display the process of charging (RED: charging; GREEN: full).
  • Note: This balance compact charger is suitable for LiPo Battery ONLY.

6. Tenergy TB6-B Balance Charger Discharger 1S-6S Digital Battery Pack Charger for NiMH/NiCD/Li-PO/Li-Fe Packs LCD Hobby Battery Charger w/ Tamiya/JST/EC3/HiTec/Deans Connectors + Power Supply 01435

  • One charger for many battery packs – Tenergy TB6-B balance charger/discharger is ideal for all hobby battery packs that are NiMH, NiCd, LiPO, Li-ion, LiFePO4, and SLA battery packs.
  • Wide connector compatibility – With one multi-charging harness, this AC balance charger is compatible with battery packs with tamiya, mini tamiya, JST, HiTec, EC3, Deans, XT60, and bare leads connectors so that additional connectors can be added.
  • Works with multiple voltages – Compatible with battery packs with voltages that ranges from 6 to 12 for nickel metal hydride or nickel–cadmium battery packs and Lithium-ion battery packs with voltages from 3.7 volts to 22.2 volts (1s-6s).
  • Multiple functions – More than a regular digital balance charger, Tenergy TB6-B comes with features like Li-ion and LiPO balancing, fast charging, data storage, cyclic charging, discharging, and much more for all of your battery packs.
  • Easy to read screen – View all charging statuses and settings on the electronic balance charger LCD screen as you navigate the modes and selections. Buy with confidence, your charger includes Tenergy a 12-month warranty.

7. HTRC LiPo Charger 2S-3S Balance Battery Charger 7.4-11.1V RC B3AC Pro Compact Charger(White)

  • ★ Parameter: 2S & 3S charger, AC100-240V input, max charge current: 3*1000mA. Our charger’s shell is made of fire-proof material.
  • ★ Each cell is charged by independent line, which make sure each battery’s cell is always fully charged, extending battery’s life. Note: This balance compact charger is suitable for LiPo Battery ONLY.
  • ★ LED to indicate: Double color LED can display the process of charging (RED: charging; GREEN: full).
  • ★ This charger is compact and light, especially there is separated corresponding balance port for each battery pack.
  • ★ What You can Get: Thank you for choosing HTRC balance charger, you can get a balance charger, an AC cable, a manual, and a color box.

8. Redcat Racing HX-A3 Hexfly Lipo Battery Charger

  • Genuine Redcat Racing Replacement part # HX-A3
  • Use only genuine Redcat Racing Replacement parts to achieve the best performance with your Redcat Racing vehicles.
  • Please consult your user’s manual to ensure this is the correct part for your model.
  • Compatible with 2S and 3S LiPo batteries.
  • Note: Please read the user manual before use

9. Lipo Battery Charger, Hiyiton RC Battery Charger RC Car Battery Pack Balance Charger Discharger for 1-6S Lipo Li-ion NiMH NiCD Li-Fe with Tamiya XT60 Deans Futaba Connectors

  • Support Battery Packs – The RC battery charger is ideal for all hobby battery packs, compatible with various kind of RC toy battery, like RC drone, RC car, RC Robot, RC boat and for airsoft , support like LiPo 3.7V-22.2V (1S-6S), Li-ion 3.6V-21.6V (1S-6S), LiFePO4 3.3V-19.8V (1S-6S), NiMH/NiCD 1.2V-18.0V(1S-15S),SLA( 2V-24V).
  • More connector types- This RC battery balance charger is compatible with almost all popular RC battery connectors, like Tamiya, Deans, XT60, Futaba connectors. Conveniently, you don’t need to buy other cables separately.
  • Multiple advanced functions – More than a regular Lipo battery charger, it comes with features like balancing charging, fast charging, memory storage&load, cyclic charging&discharging, warning and error message, processing time limit, and much more information in the program.
  • Package included – 1×V6 battery charger; 1×adapter; 1×AC power cable;1×DC Cable; 1×T-Crocodile Clipe;1× XT60 Plug;1×4mm to Deans Charge Cable;1×Timiya cable;1×manual .
  • Wide voltages compatibility – Work with voltages ranges from 1.2 volts to 18 volts for nickel-metal hydride or nickel-cadmium battery packs, and Lithium battery packs with voltages from 3.7 volts to 22.2 volts.
  • Higher safety standards- This multi-battery charger is built in an advanced smart chip to avoid over-current, over-discharge, over-voltage, and short-circuit. And it has been strictly processed to reach higher safety standards.

10. OL-3 Airsoft Lipo Charger, 2 -3 Cells 20W Li-Po Charger for Airsoft & RC Car 7.4V / 11.1V Battery Packs with 1.6A Output, 2S to 3S XH Connector

  • Easy to operate. Multiple protection: core protection, overvoltage protection, overcharging protection
  • Max Output: 3*1600mA 20W ;AC Input 110-240V for all over the world. Can fully charge 11.1V 1200mAh Li-Po Battery Pack within 1.5 hours
  • Built-in balance port, ensuring that each cell is fully charged and protected, maximizing battery life and performance.
  • Package comes with free gift one 2S AB clip and one 3S AB clip to protect the wire from breaking out off.
  • Only for 2S-3S LiPo & Li-ion battery packs.Great for Airsoft & RC Car LiPo Battery.

Table of Contents