1. Bob Smith Industries BSI-201 Quik-Cure Epoxy (4.5 oz. Combined),Clear

  • Made in the USA
  • Five minute working time
  • Handle parts in ten minutes
  • Proud Sponsors of Wounded Warrior Project

2. G/FLEX EPOXY QT KIT

  • EXCELLENT ADHESION to hard-to bond woods. This toughened, versatile liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration.
  • IDEAL FOR BONDING dissimilar materials. It can be modified with WEST SYSTEM fillers and additives and used to wet-out fiberglass tapes and fabrics. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs and a workable cure in 7-10 hours.
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass. Can also be used to wet out and bond fiberglass tapes and fabrics.
  • MAKES STRUCTURAL BONDS that can absorb the stress of expansion, contraction, shock, and vibration. G/flex can be used on damp or wet surfaces, and even underwater when applied with specific techniques. Perfect for repairs to aluminum and boats and canoes or kayaks made of polyethylene or ABS.
  • EASILY MODIFIED with WEST SYSTEM Fillers, Additives, and Pigments to suit the job at hand. Adding G/flex to other WEST SYSTEM epoxies can improve their toughness and flexibility. Not intended for clear coating.

3. Devcon Epoxy, 2 Ton Epoxy, 4.25 Ounce each, 2 Bottles

  • Ideal for joining wood, metal, concrete, glass, ceramics, china and more
  • Sets in 30 minutes with strength up to 2,500 pounds per square inch
  • Includes 2 bottles; 4-1/2 ounce bottles
  • Dries clear
  • water resistant

4. WEST SYSTEM G/flex Epoxy (2- 4oz)

  • G/flex 650 is a toughened, versatile, liquid epoxy for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods.
  • G/flex adheres tenaciously to difficult- to-glue hardwoods, both tropical and domestic varieties. This is important since many of the exotic and tropical species now being used to replace traditional woods present bonding challenges.
  • G/flex has the ability to glue damp woods. It can be used on wet surfaces, even underwater when applied with specific techniques.
  • Country of origin: United States

5. Gorilla 2 Part Epoxy, 5 Minute Set, .85 Ounce Syringe, Clear, (Pack of 2) – 4200130

  • Strong, permanent, fast and gap-filling; great for multiple surface applications
  • Best for tough repairs requiring a durable bond, gap-filling and solvent resistance
  • Dries clear; ideal for clean, easy finishing
  • 6 minute set; plenty of repositioning time for the perfect fit
  • Easy-to-use syringe; separate barrels of resin and hardener keep epoxy from hardening, plus syringe dispenses evenly and includes a cap for multiple uses

6. Rogue Slow Setting Epoxy Set For Knife Making, One 4 Oz Hardener And One 4 Ounce Resin Premium USA Made

  • 30 MINUTE WORKING TIME – From the time you pour and mix the two part epoxy you have 30 minutes until the solution is no longer able to be applied. This is the most common set time because it allows the user to set multiple knives, scales, liners etc.
  • 1 HOUR CURE TIME – From the time you apply the two part solution to the pieces of your steel blade and handle materials, you have 1 hour until the epopxy and handle materials are fully set and cured.
  • HIGH STRENGTH – Our epoxy was tested and manufactured to be able to withstand any conditions from the dish washer to normal or aggressive wear and tear on the knife or blade. This slow setting DOES have some flex to it which makes it even better than the competition!
  • APPLY TO ANY SURFACE – Our product can be used on all metals, plastics, vulcanized fibers (fish paper), carbon fibers, bone and all of the various types of woods used in knife making.
  • SATISFACTION GUARANTEED – We Guarantee the quality, strength & longevity of this product with 100% satisfaction or your money back!

7. Bob Smith Industries BSI-205 Clear Slow-Cure Epoxy (4.5 oz. Combined)

  • Made in the USA
  • 30 minute working time
  • Handle parts in 8 hours
  • Proud Sponsors of Wounded Warrior Project

8. BSI BSI-202 Quick-Cure 5Min Epoxy Bob Smith Ind, 9 oz.

  • Quik-cure 5 min, epoxy cures to a slightly flexible consistency
  • Forms a lasting bond in areas subjected to high vibration or stress
  • Made in the USA

9. Epoxy Adhesive C-POXY 30 by CECCORP Two-Part 30-Minute – Recommended for Bonding Metal, Ceramics, Stone, Glass, Concrete, Wood, Fiberglass and Many Plastics – Strong Bonding – 8.5 Oz

  • ★【COMMON APPLICATIONS】➤ Modeling, Hobbies, Wood Working, Toy Repairs, Car Part Repairs, 3D Printing Parts, Bonding, Framing Repairs, Glass Repairs, Furniture Repair/Manufacturing, Ceramic Repairs, Jewelry Application.
  • ★【DIRECTIONS FOR USE】➤ Part A and B need to be mixed thoroughly in the correct volume ratio of 1:1 for minimum 1 minute before use. Gel time of the mixed product is 20-40 minutes at room temperature. Parts requiring bonding should be assembled and kept close without any stress. Assembling is continued until full curing takes place. Excess of the product can be cleaned with Acetone or any solvent-based cleaner compatible with the substrates to bond.
  • ★【SHELF LIFE】➤ Minimum two (2) years in unopened packaging at +5°C / +27°C.
  • ★【STORAGE】➤ Product must be kept in a cool and dry room at 10°C to 25°C.
  • ★【SAFETY HANDLING】➤ Consult Material Safety Data Sheet (MSDS) before use.

10. Epoxy Adhesive C-TOUGH by CECCORP Two-Part Epoxy Glue for Metals, Aluminum, Glass, Fiberglass, Masonry, Wood, Stones, Rigid Plastics (P.V.C – ABS) – Not Suitable for PTFE.PP.PE & Rubbers – 8.5 Oz

  • ★【COMMON APPLICATIONS】➤ Anywhere that you would need an extraordinarily strong structural bond with long working time such as Aluminum or Wooden boat repair, Knife Handle making/repairing, Fiberglass patching/repairing, Golf Re-shafting, Sword Handle assembly/repair, Furniture repair, Any kind of Structural Bonding on Aluminum parts, Canoe repair, Composite Bonding, Automotive Industry, Gun Stock assembly/repairs, Pen Manufacturing, RC repairs.
  • ★【DIRECTIONS FOR USE】➤Part A and B need to be mixed thoroughly in the correct volume ratio of 1:1 for minimum one (1) minute before use. Gel time of the mixed product is 40-60 minutes at room temperature. Parts requiring bonding should be assembled and kept close without any stress. Assembling is continued until full curing takes place.
  • ★【SHELF LIFE】➤ Minimum two (2) years in unopened packaging at +5°C / +27°C.
  • ★【STORAGE】➤ Product must be kept in a cool and dry room at 10°C to 25°C.
  • ★【SAFETY HANDLING】➤ Consult Material Safety Data Sheet (MSDS) before use.

Table of Contents