1. Sound Town METIS Series 1800 Watts 15” Powered Subwoofer with Class-D Amplifier, 4-inch Voice Coil (METIS-15SDPW)

  • MASSIVE POWER: Powered by a built-in Class-D amplifier, the subwoofer handles 500 Watts RMS / 1000 Watts Program / 1800 Watts Peak Power and generates punchy and tight bass
  • HIGH-PERFORMANCE AND LIGHTWEIGHT: The Class-D amplifier efficiently provides enormous power without weighing you down. Thanks to the Class-D topology, the high-output 15” PA subwoofer is powerful and lightweight
  • VERSATILE INPUT OUTPUT CONNECTIONS: Easy to integrate this stage subwoofer with your PA rig. It has 2 XLR-1/4” combo and 2 RCA inputs, 2 XLR (through or 100Hz-200Hz high pass selectable) and RCA outputs and provides great connection and flexibility. The 35mm pole mount socket accommodates a satellite speaker for optimal full-range PA performance
  • TOP-QUALITY COMPONENTS: The PA subwoofer comes with a top-quality 15” subwoofer and 4” voice coil, which handles massive power and generates earth shaking bass. The high-quality 5/8” birch plywood front and rear panels are designed to resist distortion at high output levels and provide punchy and focused bass
  • STURDY CONSTRUCTION: The black carpet finish with heavy-duty metal grille and corners holds up to touring applications. Two recessed ergonomic handles make it easy to transport

2. Rockville RockGhost Active Powered 8″ Hidden Car Subwoofer Sub For 15″/16″/17″ Full Size Spare Tire

  • Features: Rockville RockGhost Powered Car Subwoofer (Amplifier built in). Sub Fits Inside Spare Tire Seamlessly (Goes on top of spare tire so you can leave your spare tire in place). Hidden In Spare Tire – Takes up No Trunk Space. Protected against theft because it is completely hidden in the spare tire. 800 Watts peak output. 200 Watts RMS output. Voice Coil: Single
  • For Full Size Spare Tire Wheel Sizes of 15″/16″/17″. Extremely loud (loud enough to vibrate your mirrors). Super clean sound that is musical and will not fatigue your ears. When this is mounted in your spare tire, the sound transmits cleanly and evenly throughout the vehicle without any vibrations or unwanted noises. It actually sounded better and cleaner than an ordinary sub in the trunk. Tunnel air port design.
  • PWM MOSFET power supply amplifier built in. Low level RCA inputs. 8” high excursion Subwoofer. Reverse mounting design. Plug and play installation with wire harness containing power, ground, high level input, remote turn on, and RCA input. Back plate mounts and screws right on top of spare tire. Can also be mounted in trunk or under seat but we recommend mounting it in your spare tire. Flexible rubber surrounds.
  • Wired 20 foot dash remote with adjustable gain, bass boost, low pass crossover filter, and phase control. Deep and clear bass frequency. Auto turn on and turn off. Adjustable Input Sensitivity. Soft Delayed Remote Turn-On. Thermal Protection Circuit, Short Protection Circuit and Overload Protection Circuit
  • Phase Switch: 0° or 180°. Low Pass Filter: 50Hz – 150Hz. Frequency response: 20 Hz – 250 Hz. Bass Boost: 0 – 12dB @ 45Hz. 20 Hz Subsonic Filter. Cast aluminum casing. Requires 10 gauge power wire. Dimensions: 14.17” diameter x 5.7” height. Includes all wiring needed for installation

3. Rockville SK515 Package 15″ 2000w Loaded K5 Car Subwoofer Enclosure+DB12 Amplifier

  • Loaded Sub Enclosure Features: Rockville Single 15″ K5 2000w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 2000 Watts, Program Power Handling: 1000 Watts, CEA Rated RMS Power Handling: 500 Watts
  • Vent dimensions (inches): 2.5″ x13″ x 12.5″, Tuning frequency of enclosure: 35 Hz, 2.5″ 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire
  • Features of Amplifier: Rockville dB12 Mono Class D 2 Ohm Amplifier, CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant brands such as Kicker, Rockford Fosgate, etc.)
  • Peak: (The amount of power the amplifier can produce for a split second at the loudest part of a song), – 2 Ohm: 2000 Watts x 1 Channel, – 4 Ohm: 1300 Watts x 1 Channel, High-Speed MOSFET Power Supply, Optical Coupler Class “D” Technology
  • Amp kit features: Rockville RWK41 4 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17 4 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable

4. QPower QPF15 15″ 2200 Watt Deluxe Series DVC Car Audio Subwoofers Subs (2 Pack)

  • 15-INCH SUBWOOFER PAIR: The Pair of 15 Inch Q-Power Deluxe Series Car Audio Subwoofers with 2200 Watts MAX power handling will get your car’s audio sound system thumping
  • DUAL VOICE COIL: Dual 4″ Ohm 3″ Voice Coil; Resistance: 2 x 3.2 Ohm; Normal Impedance: 2 x 4 Ohm
  • FOAM SURROUND: Features large Foam Surround, Dupont Fibre Spider, Aluminum Former, Die Cast Frame and Chrome Basket, Vented 90 oz. Magnet; Cone Diameter (mm): 320
  • FREQUENCY/SENSITIVTY: Fs (Hz): 26; Freq. Res. (Hz): 25 – 250; SPL (DB@1w/1m): 89
  • SPECIFICATIONS: Optimized for Small Enclosure; Qms: 3.6; Qes: 0.46; Qts: 0.4; Vas (Liter): 125; Mms (g): 256; Cms (mm/N): 0.14; L1K (mH): 4.6; L10K (mH): 2.01; Xmax (mm): 10; Speaker Displacement (Liter): 6.5; Dimensions: 395 x 352 x 172 x 192 mm; 2-year Warranty: (1-year Manufacturer + 1-year VMInnovations)

5. Sound Storm Laboratories LOPRO10 Amplified Car Subwoofer – 1200 Watts Max Power, Low Profile, 10 Inch Subwoofer, Remote Subwoofer Control, Great For Vehicles Needing Bass But Have Limited Space, Black

  • Built-in amplifier: with a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for higher switching frequencies
  • Variable Low-Pass Filter – A low-pass filter is an electronic circuit that removes all the notes above the filter’s frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s)
  • High level inputs: speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level (RCA) inputs
  • Low-Level Inputs – Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers
  • Variable bass boost: variable bass boost allows you to adjust the low bass within the boost Range to just the way you like it
  • Dimensions: 15” x 9. 75” x 3”. If you are short on space, This is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles
  • : sound storm provides a powerful 3-year Platinum online dealer so long as the purchase is made through . We strongly encourage Professional installation of this product to ensure proper and safe functionality

6. Polk Audio PSW10 10″ Powered Subwoofer – Power Port Technology, Up to 100 Watts, Big Bass in Compact Design, Easy Setup with Home Theater Systems Black

  • POWERED SUBWOOFER FOR EXTRA BASS & PUNCH – A 10-inch Dynamic Balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive. A perfect solution for your small-to-mid size room
  • LOUDER CLEARER SOUND EVEN AT HIGH VOLUME – Enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. BLENDS EASILY WITH ANY SPEAKER and plays the most demanding nodes effortlessly without any distortion
  • DOUBLE THE AMPLIFIER POWER TO 100 Watts of Dynamic Power with its in-built 50-watt RMS amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and FIT FOR EXTENDED USE
  • EASY TO INTEGRATE WITH EXISTING SYSTEMS – Hook up this sub to the receiver and upgrade your music sound instantly! Features continuously variable 80-160 Hz crossover and 40-160 Hz (-3dB) frequency response
  • A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for multiple subwoofers, make this sub cohesive and complete!

7. Kicker Bundle Compatible with Universal Car Trunk 44L7S152 L7 15″ Loaded Vended Sub Box Enclosure with 43CXA1800.1 Amplifier and Amp Wiring Kit

  • Subwoofer & Amp are Kicker Factory Refurbished

8. Skar Audio Single 15″ Complete 1,200 Watt SDR Series Subwoofer Bass Package – Includes Loaded Enclosure with Amplifier

  • All-in-One Complete SDR Series Loaded Subwoofer Complete Bass Package
  • Peak Power: 1,200 Watts, RMS Power: 600 Watts
  • Includes x1 Skar Audio SDR-1X15D2 Single 15″ Loaded 1,200 Watt Vented Subwoofer Enclosure
  • Includes x1 Skar Audio RP-800.1D Class D 800 Watt Monoblock Car Subwoofer Amplifier
  • Includes x1 Skar Audio SKAR4ANL-CCA 4 Gauge Complete Amplifier Wiring Kit

9. Lanzar 15in Car Subwoofer Speaker – Black Non-Pressed Paper Cone, Stamped Steel Basket, Dual 4 Ohm Impedance, 1200 Watt Power and Rubber Suspension for Vehicle Audio Stereo Sound System – MAX15D

  • 1200 WATT POWER: This car subwoofer has 1200 Watt peak power that will produce high sound resonance. It also has 70 + 70 oz. heavy double stacked magnet structure, golden input terminals and dual 4 Ohm impedance
  • WIDE RUBBER SUSPENSION: Made with this non-fatiguing rubber suspension to keep equipment safe. Designed with bumped and vented motor structure for durability and easy installation. The overall diameter is 15.12″
  • NON-PRESSED PAPER CONE: It is a clean-cut car subwoofer that boasts a black non-pressed paper cone. It will enhance car stereo by producing a powerful audio and keep equipment safe at the same time
  • KAPTON VOICE COIL: The speaker subwoofer comes with a 2.5” dual layer high-temperature Kapton voice coil to resist corrosion. It has a stamped steel basket as well, with a sensitivity of 90.3dB and a special designed rubber magnet boot
  • 7.68” MOUNTING DEPTH: Easy to install with its 7.68” mounting depth and fits most audio system for cars, boats or RVs. Included are the necessary cables, installation template and manual

10. Kicker 44TCWC102 10″ 600W Complete Subwoofer Bass Package with Loaded Subwoofer Enclosure, Boss Audio 1500W Monoblock Amplifier, & Amp Wiring Kit

  • COMPLETE SOUND SYSTEM: Upgrade your car’s sound system with this complete amplified bass package bundle that includes: 10″ subwoofer, an enclosure, a mono block amplifier, and an 8-gauge wiring kit
  • CAR SUBWOOFER: This Kicker 2-ohm subwoofer boasts 600 watts max power and 300 watts RMS
  • CAR AMPLIFIER: The Boss AR1500M Armor Series 1500 Watt Mono Car Amplifier delivers 700 watts RMS at 4 ohms to power your subwoofer. It includes a remote bass control
  • SUBWOOFER BOX ENCLOSURE: This Kicker enclosure features a custom port design and is made with sturdy MDF construction and charcoal gray carpet
  • AMPLIFIER KIT: Install your amp with ease with the competition quality 8 gauge kit that is included in this package

Table of Contents